Shingled Semi Flexible Solar Panels

Shingled Semi Flexible Solar Panels

60W/110W/160W

Warranty

  • 2 years Manufacturer
  • Warranty Warranty on Electrical
  • Performance:10 years 80% of power output

Manufacturing

  • Original cell sorting system ensures the best electric cell match
  • EL-Testing before packing.
  • Comprehensive module power testing.

Performance

  • Upgraded efficiency and unprecedented flexibility.
  • Weakened hot-spot effect, extremely low risk of micro cracks and increased stability by shingle-tech.
  • Special connection method lowers the internal resistance and ensures better performance than traditional connection with busbar.
  • IP67 rated junction box, reliable cables and standard MC4 connectors improve the stability

Technical Parameter

Mechanical Data
Standard Test Conditions AM=1.5, E=1000W/m2, TC=25℃
Nominal Power 60W 110W 160W
Cell Type Monocrystalline Monocrystalline Monocrystalline
Cell Efficiency 21.40% 21.40% 21.40%
Maximum Power Current (Impp) 3.30A 5.71A 7.27A
Maximum Power Voltage (Vmpp) 18.15V 19.25V 22V
Open-circuit Voltage (Voc) 21.45V 22.75V 26V
Short-circuit Current (Isc) 3.81A 6.22A 7.79A
Maximum System Voltage 100V 100V 100V
Output Tolerance 3% 3% 3%
Cable 900mm / 1.5mm2 900mm / 2.5mm2 900mm / 2.5mm2
Connector Type MC4 / MC4 Compatible MC4 / MC4 Compatible MC4 / MC4 Compatible
Module Structure ETFE / EVA / Backsheet ETFE / EVA / Backsheet ETFE / EVA / Backsheet
Junction box rating ≥IP67 ≥IP67 ≥IP67
Number of Diodes One One One
Working Temperature -20℃~+65℃ -20℃~+65℃ -20℃~+65℃
Packaging
Module Dimensions 880*350*2mm 1130*520*2mm 1220*680*2mm
Module Weight 1.3kg 2.5kg 3.5kg
Package Single Package Single Package Single Package
Pieces per Pallet 56 33 30
Gross Weight per Pallet 120kg 115kg 135kg
Pallet Dimensions 1200*1100*700mm 1200*1100*700mm 1240*1100*840mm

Installation

Tools:

Multi meter, Ampere meter, Insulated gloves, Screw driver, Cold press terminal plier, Other installation tools

Note:

  1. All wiring must be well-fastened to avoid
  2. Make sure that the polarity of PV and batteries connected to the product is
  3. Should install utility, battery and PV input breaker to ensure
  4. It is forbidden for inverter to share the same solar panel
  5. Battery and solar panel connections must be within the parameters of the
  6. Should install SPD on utility and PV input to protect the
  7. During the operation of the system, do not disconnect the
  8. In areas with large dust, regular cleaning is required to avoid too much dust affecting heat
  9. Inverter protection degree is
Scroll to Top