Power Wall For Home Energy Storage

Powerporter 5KW

Powerporter 10KW

Power Wall For Home Energy Storage

Wall mounted, Led display, smart BMS, on-grid and off-grid applications, compact and slim construction,fashion design

Residential applications for solar energy storage, compatibe with vary inverters.


Wide compatibility

  • Fully compatible with most inverters on the global market,such as SMA, SolarEdge, Sungrow, Huawei, Victron Energy, Schneider, Growatt, EverExceed, Ginlong, Sofarsolar, SolaX, East, Deye, etc.

Long service life and high reliability

  • 15+ years long life design@25°C ;
  • Adopt approved grade A
  • Cells to ensure high safety and premium performance of the battery;
  • High operational reliability.

Compact Size

  • UItra-compact design,low weight;
  • Wall mounted, save the installation space;
  • High energy density standby power.

Expansion capability

  • Parallel connection available for flexible system capacity extension
  • Suitable for both rack and wall mounted installation
  • High operational reliability



Battery Data
Nominal Voltage 51.2V 51.2V
Nominal Energy 5.1kWh 10.2kWh
Discharge Voltage 45~57.6V 45~58V
Charge Voltage ~57.6V ~54V
Cont. Charge Current 50A 50A
Max. Charge Current 90A 90A
Cont. Discharge Current 50A 60A
Max. Discharge Current 100A 100A
Max. Discharge DC Power 5000W 5000W
Operating temperature 0℃ ~ 45℃ (Charge) -20℃ ~ 45℃(Discharge) 0℃ ~ 45℃ (Charge) -20℃ ~ 50℃(Discharge)
General Data
DOD 90% 90%
Communication CAN2.0 / RS485 CAN2.0 / RS485
Cycle Life >2000 >2000
IP Grade IP31 IP30
Installation Wall or Floor mount Wall or Floor mount
Dimension 685×460×155mm 830×460×205mm
Weight 47.5kg 90.5kg
Warranty 3 Years 3 Years



Multi meter, Ampere meter, Insulated gloves, Screw driver, Cold press terminal plier, Other installation tools


  1. All wiring must be well-fastened to avoid
  2. Make sure that the polarity of PV and batteries connected to the product is
  3. Should install utility, battery and PV input breaker to ensure
  4. It is forbidden for inverter to share the same solar panel
  5. Battery and solar panel connections must be within the parameters of the
  6. Should install SPD on utility and PV input to protect the
  7. During the operation of the system, do not disconnect the
  8. In areas with large dust, regular cleaning is required to avoid too much dust affecting heat
  9. Inverter protection degree is
Scroll to Top