Lead-acid Replacement Battery

24v100AH (LS24100) & 24v150AH (LS24150)

12v100AH (LS12100)

12v200AH (LS12200)

12v300AH (LS12300)

Lead-acid Replacement Battery

Deep cycle long life and light weight, smart BMS, best replacement for lead acid battery

Applications for EV, RV, solar energy storage, camping, fishing, outdoor and marine activities.

Provide better energy solutions. Easily use the same space as existing 12V batteries, and replace traditional solar battery storage units, such as sealed, AGM or gel batteries, and use LiFePO4 batteries for power sports applications, off-grid applications, and solar storage. It can also run your boats, RVs, trailers, golf carts, etc.

Our lithium iron phosphate battery has a built-in BMS (Battery Management System), which has an excellent self-discharge rate and can prevent overcharge, overdischarge, overcurrent and short circuit. The built-in high temperature cut-off function prevents charging above 122 °F (50 °C). In addition, lithium-ion batteries are safer than lead-acid batteries, and lead-acid batteries have no ground fault protection. The highest safety level of battery cells and battery packs based on UL test certificates.

APPLICATIONS

  • BOATS
  • Golf Carts
  • Electric Bicycles/Scooters
  • Electric Folklifts
  • Electric Vehicles
  • Electric Wheelchairs
  • Electric Power Systems
  • Solar Energy Storage Systems
  • Uninterruptible Power Supplies

12V 24v LiFeP04 Deep Cycle Battery

ITEM12v100AH
(LS12100)
12v200AH
(LS12200)
12v300AH
(LS12300)
24v100AH
(LS24100)
24v150AH
(LS24150)
CELL TYPELiFePO4LiFePO4LiFePO4LiFePO4LiFePO4
VOLTAGE12.8V12.8V12.8V24V24V
CAPACITY100AH200AH300AH100AH200AH
CYCLE LIFE2000-4000 TIMES
CHARGE CURRENT5A-50A5A-100A5A-150A5A-50A5A-100A
SELLING UNTISSINGLE LTEM
DIMESION329*172*223mm522*240*221mm520*267*223mm329*172*223mm329*172*223mm
WEIGHT12KG26KG36KG26KG36KG
WARRANTY1 Year
COLOURBLCAK
OPERATION TEMPERATURE-4°F ~ 140°F
Maximum Continuous100A200A300A100A200A
Peak Discharge Current200 A
(7.5s ±2.5 s)
250A300A200 A
(7.5s ±2.5 s)
250A

Installation

Tools:

Multi meter, Ampere meter, Insulated gloves, Screw driver, Cold press terminal plier, Other installation tools

Note:

  1. All wiring must be well-fastened to avoid
  2. Make sure that the polarity of PV and batteries connected to the product is
  3. Should install utility, battery and PV input breaker to ensure
  4. It is forbidden for inverter to share the same solar panel
  5. Battery and solar panel connections must be within the parameters of the
  6. Should install SPD on utility and PV input to protect the
  7. During the operation of the system, do not disconnect the
  8. In areas with large dust, regular cleaning is required to avoid too much dust affecting heat
  9. Inverter protection degree is
Scroll to Top