REVO II Hybrid Energy Storage Inverter

REVO II Hybrid Energy Storage Inverter

3.5-5.5KW

Product Snapshot

  • Dimensions: 345x476x133.2
  • Model:3-5.5kW
  • Nominal Voltage: 220/230/240VAC
  • Frequency Range: 50Hz/60Hz

APPLICATIONS

  • Touch screen display.
  • PV and utility power the load at the same time ( can be set ).
  • Output power factor PF=1.0 .
  • On&Off Grid with energy storage.
  • Energy generated record, load record, history information and fault record.
  • Structure with dust filter.
  • AC charging start and stop time setting.
  • External Wi-Fi device optional.
  • Parallel operation up to 9 units .
  • Connected with battery optional. Wide
  • PV input range120-450VDC.
  • Independent CPU.
    MAX PV Array power 5500W.
  • Solar and Utility supply power to the load When solar power is not sufficient to load.
  • The CT sensor will monitor the power consumption of the system and will make sure no excess PV power is delivered to the Grid.

Technical Specification

MODEL REVO REVO II 3k-24 REVO II 3.2k-48 REVO II 5.5k-48
Max PV Array Power 5500W
Rated Output Power 3000W 3200W 5500W
MPPT Range @ Operating Voltage 120-450VDC
GRID-TIE OPERATION
GRID OUTPUT (AC)
Nominal Output Voltage 220/230/240VAC
Output Voltage Range 184-265VAC
Nominal Output Current 13.6A/13.0A/12.5A 14.5A/13.9A/13.3A 20.5A/19.6A/18.8A
Efficiency up to 93%
OFF-GRID, HYBRID OPERATION
GRID INPUT
Acceptable Input Voltage Range 120-280VAC or 170-280 VAC
Frequency Range 50Hz/60Hz (Auto sensing)
BATTERY MODE OUTPUT (AC)
Nominal Output Voltage 220/230/240VAC
Output Wave Form Pure sine wave
BATTERY & CHARGER
Nominal DC Voltage 24VDC 48VDC
Maximum AC Charge Current 60A
Maximum Charge Current(AC+PV) 90A
EMERGENCY OUTPUT POWER
Maximum output Power 3000W 3200W 5500W
Surge Power 6000W 6400W 11000W
Automatic Transfer Time <10ms
GENERAL
INTERFACE
Parallel Function Yes
Communication USB or RS232,WIFI, Generator dry-Contact
ENVIRONMENT
Humidity 0~90% RH (No Condensing)
Operating Temperature 0 to 50℃
Net Weight(KG) 11.75 11.9
Gross Weight(KG) 12.75 13.1
Dimension (W x D x H)mm 345x476x133.2

Installation

Tools:

Multi meter, Ampere meter, Insulated gloves, Screw driver, Cold press terminal plier, Other installation tools

Note:

  1. All wiring must be well-fastened to avoid
  2. Make sure that the polarity of PV and batteries connected to the product is
  3. Should install utility, battery and PV input breaker to ensure
  4. It is forbidden for inverter to share the same solar panel
  5. Battery and solar panel connections must be within the parameters of the
  6. Should install SPD on utility and PV input to protect the
  7. During the operation of the system, do not disconnect the
  8. In areas with large dust, regular cleaning is required to avoid too much dust affecting heat
  9. Inverter protection degree is
Scroll to Top